Shelly 1 Mini Gen3
Device identification Device name: Shelly 1 Mini Gen3 Device model: S3SW-001X8EU Device SSID: Shelly1MiniG3-XXXXXX BLE model ID: 0x1015 Short description Shelly1 Mini Gen3 is a small form factor smart switch with potential-free contacts, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system. It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services. The device is an improved version of Shelly Plus 1 Mini with a more advanced processor and increased memory. Shelly1 Mini Gen3 can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet. It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space. Shelly1 Mini Gen3 Mini has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings. Main features Wi-Fi Connectivity: The device can connect to your home Wi-Fi network, allowing you to remotely monitor humidity and temperature data through a smartphone app or other compatible devices. Integration with Smart Home Platforms: You can integrate the Shelly 1 Mini Gen3 with popular smart home platforms, including Google, Alexa, and Samsung SmartThings. This enables voice control and automation capabilities through these platforms. Bluetooth Connectivity: Bluetooth and BLE gateway are available for inclusion purposes, which may be useful during the setup process. User-Friendly Interface: The device provides a user-friendly interface with a reset button for manual interactions. Improved Processor and Memory: Upgraded with an improved processor and increased memory for enhanced performance. Wireless Connectivity: The device supports Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 protocols with specified indoor and outdoor range capabilities. Dry Contact: Allows switching on and off of lower voltage devices. BLE Gateway: Bridge between your Shelly BLU devices and the wider Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-bluetooth device. Wi-Fi Range extender for IoT devices: A Wi-Fi extender is employed to expand the reach of your Wi-Fi network by receiving your current Wi-Fi signal, enhancing its strength, and then transmitting the enhanced signal over a wider area. Scripting: Current Shelly scripting documentation Wide range of integrations: The device can be integrated with 3rd party home systems, documented HTTP API, MQTT(s), Web Hooks over HTTP and HTTPS, UDP Schedules: Allows scheduling of complex operations to be executed in predefined time window. Users can specify time windows based on date, time of day, weekdays, hours, minutes and seconds. Use cases Remote Appliance Control: Turn on or off electric appliances remotely using your mobile phone, tablet, PC, or home automation system. Internet-Connected Convenience: Access аnd control devices from anywhere with internet connectivity, as long as the Shelly 1 Mini Gen3 is connected to a Wi-Fi router. Space-Efficient Retrofitting: Retrofit the smart switch into standard electrical wall boxes, behind power sockets, light switches, or other locations with limited space. Home Automation: Shelly 1 Mini Gen3 enables automatic control of power appliances for more relaxing and enjoyable experience. Integrations Amazon Alexa supported capabilities Yes Google Smart Home supported traits Yes Samsung SmartThings supported capabilities Yes Simplified internal schematics Device electrical interfaces Inputs 1 switch/button input on screw terminal 1 potential-free contacts relay input on screw terminal 2 power supply inputs on screw terminals: N and L Outputs 1 potential-free contacts relay output on screw terminal Connectivity Wi-Fi Bluetooth Safety function Overheating protection Supported load types Resistive (incandescent bulbs, heating devices) Capacitive (capacitor banks, electronic equipment, motor start capacitors) Inductive (LED light drivers, transformers, fans, refrigerators, air-conditioners)) User interface Inputs One (Control) button Press and hold for 5 seconds to enable Device access point and Bluetooth connection. Press and hold for 10 seconds to factory reset the Device. Outputs LED (monocolor) indication AP (Access Point) enabled and Wi-Fi disabled: 1 second ON / 1 second OFF Wi-Fi enabled, but not connected to a Wi-Fi network: 1 second ON / 3 seconds OFF Connected to a Wi-Fi network: Constantly ON Cloud is enabled, but not connected: 1 second ON /5 seconds OFF Connected to Shelly Cloud: Constantly ON OTA (Over the Air Update): ½ sec ON / ½ second OFF Button pressed and held for 5 seconds: ½ second ON / ½ second OFF Button pressed and held for 10 seconds: ¼ second ON / ¼ second OFF The list above starts with the initial device status and the lowest priority. Every next state cancels the previous one. Specifications Quantity Value Physical Size (HxWxD): 29x34x16 ±0.5 mm / 1.34x1.11x0.63 ±0.02 in Weight: 19 ±1 g / 0.65 ±0.04 oz Screw terminals max torque: 0.4 Nm / 3.5 lbin Conductor cross section: 0.5 to 4 mm² / 20 to 11 AWG (solid, stranded, and bootlace ferrules) Conductor stripped length: 6 to 7 mm / 0.24 to 0.28 in Mounting: Wall box Shell material: Plastic Shell color: Blue, C-95%; M-53%; Y-0%; K-0% Terminal Color: Black Environmental Ambient working temperature: -20 °C to 40 °C / -5 °F to 105 °F Humidity: 30 % to 70 % RH Max. altitude: 2000 m / 6562 ft Electrical Power supply: 110 - 240 VAC Relay: Dry, NO contact, 1-pole, µ contact Power consumption: < 1.2 W External protection: Tripping characteristic B or C, 10A max. rated current, min. 6 kA interrupting rating, energy limiting class 3 Output circuits ratings Max. switching voltage: 240 VAC 30 VDC Max. switching current: 8 A/240 VAC 5 A/30 VDC Max. output power: 2000 W/240 VAC 150 W/30 VDC Voltage protection / Cutoff: No Current protection / Cutoff: No Max power protection / Cutoff: No Sensors, meters Internal-temperature sensor: Yes Radio Wi-Fi Protocol: 802.11 b/g/n RF band: 2401 - 2495 МHz Max. RF power: < 20 dBm Range: Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions) Bluetooth Protocol: 4.2 RF band: 2400 - 2483.5 MHz Max. RF power: < 4 dBm Range: Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors (Depends on local conditions) Microcontroller unit CPU: ESP-Shelly-C38F Flash: 8 MB Firmware capabilities Schedules: 20 Webhooks (URL actions): 20 with 5 URLs per hook Scripting: Yes MQTT: Yes UDP: Yes Advanced schedules: Yes KVS (Key-Value Store): Yes Basic wiring diagrams Legend Terminals Wires SW Switch (controlling O) input terminal L Live (110 - 240 VAC) wire O Load circuit output terminal N Neutral wire I Load circuit input terminal L Live (110-240 V) terminal N Neutral terminal Shelly Smart Control Adding the device to the Shelly Smart Control Shelly Web user interface Shelly 1 Mini Gen3 Web user interface guide Components and APIs This device All Shelly devices and services Compliance Shelly 1 Mini Gen3 multilingual EU declaration of conformity 2025-07-22.pdf Shelly 1 Mini Gen3 UK PSTI ACT Statement of compliance.pdf Shelly 1 Mini Gen3 x2 UK PSTI ACT Statement of compliance.pdf Shelly 1 Mini Gen3 AU NZ Certificate for Suitability.pdf Shelly 1 Mini Gen3 multilingual EU declaration of conformity 23 2023-12-13.pdf Printed user guide Shelly 1 Mini Gen3 multilingual printed user and safety guide.pdf Ръководство за употреба и безопасност Installation guides
€14.99
In stock
